CRX Liberty - New Equipment

CRX Liberty

CR Integration System for the AMX4 Plus

A Winning Combination!

Introduced at RSNA 2008

Available early 2010

CRX Liberty Integration System has been designed to meet the challenges facing today’s budget minded healthcare providers and to help facilities optimize workflow by enabling bedside imaging.

The system is a cost effective solution that helps facilities stay at the forefront of imaging technology by putting them one-step closer to the going filmless at a fraction of the cost.

 

 

 

 

Benefits
-Extraordinary performance in a compact and easy to maneuver package
-Puts you on the fast track to going filmless at a fraction of the cost
-No more shuffling cassettes to the CR reader
-Enhances productivity and improves clinical workflow
-17” work station console provides remote users with all the image processing features and functionality that technicians expect from today’s digital systems
-Once a study is completed and images have been validated, transfer of images is easy with wireless and hardwire communications
-Cassette size options enables the technician to perform general radiology images as well as pediatric and incubator images
-Extends the lifecycle of your time tested AMX-4

Features
-High quality images at the bedside
-DICOM connectivity with storage, print class, and modality work list
-Flip-up 17” touch screen work console monitor
-Clinical workflow functions enable technicians to perform imaging processing tasks directly on the system
-Floating single cassette reader
-8x10, 10x12, 14x17 cassette sizes
-120 14x17 IP’s on a single charge
-Maintenance free rechargeable lead acid batteries
-Modular design with integrated sensible features
-Integrates in 5hrs.

Integration is Simple
The CRX Liberty Integration System is a modular design with most of its’ components supplied pre-assembled. The system lends itself to the AMX-4 chassis utilizing existing bolting locations. Once the installation training has been completed, the integration system can be installed in 5 hours.

The CRX Liberty Integration System, designed by service technicians, kept in mind that the integration of the R200 to the AMX-4 MUST NOT compromise the serviceability of existing components.

A GREAT deal of thought and design was given to the serviceability of the integrated CR reader and the AMX-4 components.

-The hinged rubber mounted CR reader has a fold down electronics drawer
-The AMX-4 has slide out electronics and a detachable battery drawer completely accessible without the need of tools

Service Technicians will appreciate the thought put forth to make maintenance easy.

Cost Comparison
In these difficult economic times reimbursement rates are getting smaller. As a budget minded administrator you must question whether or not DR is the best option for portable radiology.

Cost Comparison	CR	DR
Initial Purchase	CRX Liberty is a quarter the cost of DR units	Average DR Portable units = $200,000
Annual Service Agreement	$3,500	$20,000
CR 14 x 17 Cassette Body	$400	$70,000 DR Detector
CR 14 x 17 Image Plate	$400	$70,000 DR Detector

Once you have looked at the enormous costs associated with DR, the CRX Liberty Integration System for the AMX4 is a smart and affordable choice to bring your facility one step closer to going filmless.

CRystalView R200 Specifications

CR Reader Type
Desktop, Single Cassette, Daylight Operations, Integrated Eraser

QC Workstation
Multi workstation - Up to 4 QC Workstations per Reader

Image Plate and Cassette Sizes
14 inch x 17 inch (35.6cm X 43.2cm)
10 inch x 12 inch (25.4cm X 30.5cm)
8 inch x 10 inch (20.3cm X 25.4cm)

Throughput
14" x 17"
10" x 12"
8" x 10"

Standard Resolution
50 + plates / hour
62 plates / hour
65 plates / hour

High Resoution
39 plates / hour
49 plates / hour
53 plates / hour

Image Display Time
14" x 17" - 60 seconds (std resolution)
8" x 10" - 59 seconds (high resolution)

Pixel Pitch
Standard: 6 pixels/mm
High: 9 pixels/mm

Grey Scale Resolution
Data Acquisition: 16 bits/pixel
DICOM Output: 12 bits/pixel

Weight
150 lbs (68 kg)

Dimensions
23" x 27.5" x 15.25"
58.4cm x 69.8cm x 38.7cm

Electrical
Voltage: 100 240 VAC, 50/60 Hz, auto sensing
Power: North America: 120 VAC, 50/60Hz

Environmental Operating Conditions
Temperature: 59 degrees to 93 degrees F (15 to 34 degrees C)
Relative Humidity: 30% to 80% RH, non condensing

QC Workstation Specifications

Computer
Core 2 Duo PC, 1.86 GHz

Display
17 in. Flat Panel TFT, Color 1280 x 1024

Optional Display
20 in. Flat Panel TFT, Monochrome, Diagnostic Quality

Operating System
Windows XP Pro

Storage
200GB (20,000 standard 14x17 images)

Imaging Network
TCP/IP

Acquisition Software Features

Patient Registration
DICOM Modality Worklist or Manual Entry

Speed Class
Adjustable by Exam Type

Exposure Indicator
Indicated for Each Image

Image Review
Window/Level, Pan, Zoom, Flip, Rotate, Invert, Shutter, Annotate, Magnifying Glass

Image Processing (Based on exam type)
Multiscale Processing
Automatic Window/Level Determination

Patient Study Output
DICOM

Administrative Reports
Exposure History, Cassette Usage, Exposure Index, Deleted Exams

DICOM Compatibility
Storage Class User, Modality Worklist, Storage Commit
Print Class User, Performed Procedure Step
Import/Export to/from External Media

Patent Pending

(back to top)

CR Scanner - New Equipment

CRystalView R200

CRreate High Quality Images Anywhere
Alara's CRystalView R200 desktop CR system is a breakthrough in imaging technology. Compact enough for either a desktop or cart, CRystalView gives hospitals, clinics, medical offices, ICUs, ERs and mobile imaging services fast, high quality computed radiography imaging at an affordable price.

 

CRisp Images at 50 Plates Per Hour
Building on Alara's unmatched reputation in Computed Radiology products, CRystalView delivers industry-leading image quality at 50 plates per hour, with just 60 seconds to image display. Exam-based imaging protocols, calibrated exposure indicator tracking, and integrated eraser ensure the performance and ease-of-operation busy staffs need.

CRoss Extra Purchases Off Your List
The all-in-one CRystalView package includes a CR reader, imaging plates with cassettes, acquisition/QC workstation and software. Ongoing product updates and enhancements like a new improved graphical user interface and ACT tool will help maintain CRystalView's reputation as the simplest, fastest, most effective compact imaging system yet.

CRystalView R200 Specifications

CR Reader Type
Desktop, Single Cassette, Daylight Operations, Integrated Eraser

QC Workstation
Multi workstation - Up to 4 QC Workstations per Reader

Image Plate and Cassette Sizes
14 inch x 17 inch (35.6cm X 43.2cm)
10 inch x 12 inch (25.4cm X 30.5cm)
8 inch x 10 inch (20.3cm X 25.4cm)

Throughput
14" x 17"
10" x 12"
8" x 10"

Standard Resolution
50 + plates / hour
62 plates / hour
65 plates / hour

High Resoution
39 plates / hour
49 plates / hour
53 plates / hour

Image Display Time
14" x 17" - 60 seconds (std resolution)
8" x 10" - 59 seconds (high resolution)

Pixel Pitch
Standard: 6 pixels/mm
High: 9 pixels/mm

Grey Scale Resolution
Data Acquisition: 16 bits/pixel
DICOM Output: 12 bits/pixel

Weight
150 lbs (68 kg)

Dimensions
23" x 27.5" x 15.25"
58.4cm x 69.8cm x 38.7cm

Electrical
Voltage: 100 240 VAC, 50/60 Hz, auto sensing
Power: North America: 120 VAC, 50/60Hz

Environmental Operating Conditions
Temperature: 59 degrees to 93 degrees F (15 to 34 degrees C)
Relative Humidity: 30% to 80% RH, non condensing

QC Workstation Specifications

Computer
Core 2 Duo PC, 1.86 GHz

Display
17 in. Flat Panel TFT, Color 1280 x 1024

Optional Display
20 in. Flat Panel TFT, Monochrome, Diagnostic Quality

Operating System
Windows XP Pro

Storage
200GB (20,000 standard 14x17 images)

Imaging Network
TCP/IP

Acquisition Software Features

Patient Registration
DICOM Modality Worklist or Manual Entry

Speed Class
Adjustable by Exam Type

Exposure Indicator
Indicated for Each Image

Image Review
Window/Level, Pan, Zoom, Flip, Rotate, Invert, Shutter, Annotate, Magnifying Glass

Image Processing (Based on exam type)
Multiscale Processing
Automatic Window/Level Determination

Patient Study Output
DICOM

Administrative Reports
Exposure History, Cassette Usage, Exposure Index, Deleted Exams

DICOM Compatibility
Storage Class User, Modality Worklist, Storage Commit
Print Class User, Performed Procedure Step
Import/Export to/from External Media

(back to top)

MetriScan - New Equipment

MetriScan from Alara, Inc...

. . . was developed as a front line diagnostic tool to help physicians detect osteoporotic bone loss. MetriScan is a self-contained desktop peripheral scanner that brings the power of osteoporosis screening into the primary care arena. For the first time in your office, you can screen for one of they key risk factors of osteoporotic fractures – low bone mineral density (BDM). And you can perform the test as quickly and easily as you currently check blood pressure.

Osteoporosis – the under diagnosed disease.

The results of a recent JAMA study involving over 200,000 postmenopausal women over age 50 point to an urgent need for in-office screening for low bone mineral density (BMD). The three year JAMA study found osteoporosis woefully underdiagnosed by primary care physicians.

Lack of diagnosis and the correlation between low BMD and fracture have serious implications for the over-50 menopausal women. Clinically low BMD is directly linked to an increased risk of fracture within one year of diagnosis. And while over-50 women are the most underdiagnosed group for low BMD, many of your patients both male and female, currently can and will suffer the same BMD-related fractures.

MetriScan can change all that with a simple two minute procedure.

You can estimate a patient’s bone density during a routine check-up.

The Alara MetriScan system estimates bone density by taking a radiographic aborptiometry scan of the patient’s hand. In no more than two minutes, MetriScan estimates the phalangeal bone density of the patient’s three middle fingers. MetriScan compares the patient’s BMD against the average estimated bone density of a healthy young adult female Caucasian population (T-score) and an age-matched healthy population of the patient’s gender and ethnicity (Z-score). With the patient’s data in the system, MetriScan then calculates the patient’s T and Z scores and prints the test results for your analysis.

 

Early detection allows better treatment.

When your in-office routine involves testing at-risk patients, you’ll be better able to detect and treat low BMD before an osteoporotic fracture occurs. With the variety of FDA-approved therapies for the treatment of osteoporosis, your at-risk patient population could have a far lower risk of disabling bone fractures. This early detection device also allows you to monitor the effectiveness of your prescribed course of osteoporosis treatment. From the very first scan of your patient’s fingers, Alara MetriScan provides the data you need to better treat your patients.

The Alara MetriScan Bone Density System gives you the power to screen patients at risk for osteoporosis – while they’re in your office.

In a recent independent study of fourteen different methods of osteoporosis bone density testing, radiographic absorptiometry of the phalanges correlated with other measures as well as or better than any other measurement.

MetriScan features include:

• Less than one second scan

• Radiation dose less than 5% of dental x-ray

• Total clinical precision error = 1% vs. ultrasound systems (1.5% - 2.0%)

• No gel or patient preparation required

• Automatic calibration check

• Small footprint: 16” x 16”

Scanning has been mandated a reimbursable expense.

Since the passage of the Bone Mass Measurement Act of 1997, Medicare coverage of biannual bone density testing has made testing a more affordable and more effective treatment option for your at-risk patient population. Medicare and most private insurers cover biannual bone density testing for the following patients:

• Estrogen deficient women at risk for osteoporosis

• Men or women with vertebral abnormalities indicative of osteoporosis

• Men or women receiving long term steroid therapy

• Men or women with primary hyperparathyroidism

• Men or women being monitored to assess the response to osteoporosis drug therapy

MetriScan screening will become routine for your staff.

After a brief in-office tutorial, a practitioner can easily begin MetriScan screening of patients. It’s a self-contained desktop unit, with an intuitive interface that makes it easy for staff to input basic patient data. Unlike other screening systems that require messy gels or cumbersome equipment, the Alara MetriScan is easy to administer. It’s also painless for the patient, takes up minimal office space and exposes patients to minimal radiation.

When is comes to detecting low bone mineral density and preventing osteoporotic fractures, early detection is in your hands.

(back to top)

T-Series - New Equipment

CRystalView T-Series

Transform Your Practice
Alara’s CRystalView T-Series delivers industry leading image quality at an affordable price. With software packages specialized for both medical and veterinary practices, CRystalView T-Series is the ideal way to make digital x-ray imaging a reality in your practice – and is well within the reach of every budget.

 

 

 

 

Transcend Beyond the Norm
Alara’s CRystalView T-Series system is a unique product that offers unparalleled versatility for all imaging environments. Compact enough for desktop use and rugged enough to be operated from the back of any vehicle, T-Series gives clinics, medical and veterinary offices access to fast, highest quality computed radiography imaging at an affordable price.

Compact, Desktop, Single Plate Reader

-40 Plates/hr (8 inch x 17 inch)
-Industry Leading Image Quality
-Medical and Veterinary Software Packages

Trusted Partner for Your Digital Imaging Needs
Alara has been an industry leader in CR for over 12 years, providing quality solutions to the Dental, NDT and Medical markets. T-Series builds on Alara’s long history of supplying products that meet the demanding needs of the marketplace, T-Series continues with Alara’s tradition of manufacturing the best quality products that are compact and easy to use.

CRystalView T-Series

Image Plate and Cassette Sizes

8 inch x 17 inch (20 cm x 43 cm)
8 inch x 12 inch (20 cm x 30 cm)
8 inch x 10 inch (20 cm x 25 cm)

Throughput all sizes
Standard Resolution
40 plates / hour

High Resolution
25 plates / hour

Standard Resolution
50 + plates / hour
62 plates / hour
65 plates / hour

High Resoution
39 plates / hour
49 plates / hour
53 plates / hour

Image Display Time
All sizes- 74 seconds (std resolution)
All sizes- 127 seconds (high resolution)

Pixel Pitch
Standard: 5.9 pixels/mm
High: 11.8 pixels/mm

Grey Scale Resolution
Data Acquisition: 16 bits/pixel
DICOM Output: 12 bits/pixel

Weight
35 lbs (16 kg)

Dimensions
15.5” x 19.4” x 10.8”
39.4 cm x 49.3 cm x 27.4 cm

Electrical
Voltage 100-240 VAC, 50/60 Hz, auto sensing
Power 100 VA max (T100, 150 VA max (T110)

Environmental Operating Conditions (scanner)
Temperature 32 to 104 F (0 to 40 C)
Relative Humidity 15% to 95% RH, non-condensing

Environmental Operating Conditions (Imaging Plates)
Temperature 59 to 93 F (15 to 34 C)
Relative Humidity 30% to 80% RH, non-condensing

Safety Standards
General IEC 60601-1
EMC IEC 60601-1-2
Laser IEC 60825-1/A2, Class 1 Laser Product

Clearance
FDA 510(k)

Clearance
CE CSA

QC Workstation Specifications

Computer
Core 2 Duo PC, 1.86 GHz

Display
18 in. Plat Panel TFT, Color 1280 x 1024

Optional Display
20 in. Flat Panel TFT, Monochrome, Diagnostic Quality

Operating System
Windows XP Pro / Vista Business

Storage
200GB (20,000 standard 14x17 images)

Imaging Network
TCP/IP

Interface Cable
USB 2.0

Acquisition Software Features

Software Packages
Human, Veterinary

Patient Registration
DICOM Modality Worklist or Manual Entry

Speed Class
Adjustable by Exam Type

Exposure Indicator
Indicated for Each Image

Image Review
Window/Level, Pan, Zoom, Flip, Rotate, Invert, Shutter, Annotate, Magnifying Glass

Image Processing (Based on exam type)
Multiscale Processing
Automatic Window/Level Determination

Patient Study Output
DICOM

Administrative Reports
Exposure History, Cassette Usage, Exposure Index, Deleted Exams

DICOM Compatibility
Storage Class User, Modality Worklist, Storage Commit
Print Class User, Performed Procedure Step
Import/Export to/from External Media

(back to top)

CRX-S - New Equipment

INFO COMING SOON

 

(back to top)

Refurbished Equipment

• Imtech Imaging’s warranty and reputation go hand in hand, offering you and your customers peace of mind in purchasing decisions.
• Our refurbished Kodak Dry Lasers, MIMS, and associated products are sold with a Six Month Limited Parts Warranty.
• Our refurbished GE AMX4’s, Multiloaders and Film Processors include a One Year Limited Parts Warranty.
• The equipment warranty covers the no cost replacement of faulty part(s) only, it does not include the labor required to replace that part(s).
  

The following are EXCLUDED from the WARRANTY:

• Incorrect installation (voltages and ventilation, etc.); Changes in voltages (electrical storms and ups’s, etc.);
• Typical wear on moving parts;Improper maintenance (Dry Lasers);Improper monthly maintenance (Film Proceesor); Replaced Warranted Parts.
  

Returning Replaced Warranted Parts

• All replaced warranted part(s) will have a return authorization form and number assigned, both the warranted part(s) and form will have to be returned with the equipment serial number, location, and company name.

Non-Returned Warranted Parts

• Authorization forms and faulty part(s) that have been warranted and not returned to Imtech Imaging, Inc. within thirty (30) days will be invoiced to the dealer.

 

 

Lasers

Control Is Easy
The operator’s interfaces include two different optional remote keypads and a local panel, both display a number of options such as calibration, open supply door, print, test print, user 1, user 2, ready light, alarm light, and a main menu that displays the amount of time left before the processor is ready, film size, type, supply left, and total number of film printed.

 

 

 

 

 

Ease Of Use
Featuring nine different format options from 1:1 to 20:1, the 20:1 format is
accommodated without compression. Processing up to a 120 films per hour
and self calibrating to optimize image quality without operator intervention. The
automatically opened and closed 125 sheet daylight loaded film cartridge is easily
replaced by opening the front access door, remove the empty cartridge and placing
the new cartridge on the cartridge guides and closing the door.

Advantages
Having 78 micron laser spot spacing, 325 dpi resolution, and 4,096 gray levels for high quality crisp edged sharpness. The DryView 8700 self calibrates for consistent contrast and density, and along with a PACS Link interface that converts data from legacy modalities to DICOM so the 8700 can receive images over a network for hardcopy viewing. Therefore, enhancing productivity.

Dimensions
Length 32 inches. Width 26 inches. Height 50.4 inches.

Electrical Requirements
200/220/240 vac. +/- 10%

Warranty
Six months parts only. See warranties for specifics.

Quality Control Testing
To ensure customer satisfaction, it is Imtech Imaging’s policy that all our
refurbished equipment is tested for a minimum of 48 hours. At such time
the equipment is monitored to ensure all systems and components of the
equipment are functioning at OEM standards.

Exterior Panels
All the panels are repaired and refinished in a light gray and greige industrial coating to match the OEM’s lasted color configuration, a new name plate is installed to match the original OEM appearance.

Sensing and Solenoid Components
All U, Flag, and Interlock sensors, Kicker, Alignment, Door, and Gate solenoids are removed, cleaned, inspected, tested and reused or replaced with new.

Mechanical Systems - Rollback Asssembly - Pickup Assembly - Platen Module - Film Transport - Film Processor
The mechanical systems are disassembled, polished, refinished, rebuilt, inspected, tested, and reassembled to the main frame along with new belts, sensors, solenoids, interlocks, charcoal filter, all other filters and felts, clam shell aluminum foil, heat rollers, recoated drum assembly, drum brushes, stripper rollers assembly, etc. All are adjusted to OEM specifications and monitored at run in to assure trouble free service.

Electronic Assembly - Digital Interface - Fiber Interface - Image Processor - Memory Daughter - Machine Interface - New Modem - Power Distribution - System Control - Translator Daughter - Video Interface, etc.
The electronic PCB’s are all cleaned and inspected configured to your specifications, reinstalled and tested. During power up the power supply and all test points are checked for correct operating voltages to ensure all components are set to OEM specifications.

Laser Optic System
The LOS is removed, cleaned, inspected and reused or replaced with a reconditioned module that has a new tested laser diode installed. The module is tested again at run in to assure proper operation.

(back to top)

Dryview 8300 Image Laser and Parts

The Dry View 8300 Imager is a high quality 8 x 10 inch film printer of compact design. Perfect for ultrasound, C-arm,nuclear medicine, stereotactic, and other applications. It is capable of a direct connect or interfaced to a PACS link for basic network printing with outstanding diagnostic image quality.

 

 

Dimensions
Height 18 inches, Width 18 inches, Length 26 inches.

Electrical Requirements
110 VAC +/- 10% 60 Hz

Warranty
Six months parts only. See warranties for specifics.

Advantages
Featuring true dry laser technology, four different format options 1:1, 2:1, 4:1 and 6:1. Producing up to 55 images per hour with 300 dpi resolution and 256 gray levels. Easy to replace 100 sheet daylight loaded film package, and automatically monitors contrast and density for superior image quality. The 8300 Dry View Imager enhances work flow and productivity.

(back to top)

Dryview 8100 Image Laser

The Dryview 8100 Imager is a high quality 14 x 17 inch designed for low to medium volumn image facilities with the benefits of dry laser technology. Perfect for CT, MRI, and DSA. Capable of a direct connect or interface to a PACS links for basic network printing and outstanding diagnostic image quality.

 

 

 

 

 

 

 

 

 

 

Dimensions
Height 46 inches, Width 25 inches, Length 26 inches.

Electrical Requirements
110/240 VAC +/- 10%, 50/60 Hz

Advantages
Featuring true dry laser technology, 55 films per hour, 325 dpi resolution over
4,000 gray levels, AIQC that automatically calibrates the 8100 and adjusts
contrast and density to meet user preferences all without operator intervention.

Optional
8100 Keypad

(back to top)

Dryview 8610 Image Laser

The Dry View 8610 Imager is an exclusive full field, high resolution digital mammography printer.
An affordable first step toward PACS and a perfect addition to any facility where digital imaging is warranted to help meet the needs of rising demands for schedueld mammogram visits.

 

 

 

 

 

Dimensions
Height 18 inches, Width 18 inches, Length 26 inches.

Electrical Requirements
100-240 VAC, 50/60 Hz

Warranty
Six months parts only. See warranties for specifics.

Advantages
Featuring true dry laser technology, a built-in PACS interface capable of converting image data to DICOM and receiving DICOM image data from a network. Printing up to 40 images per hour with 655 dpi resoluion, over 4,000 gray levels, and with no operator intervention, monitors contrast and density presets for consistent film to film image quality, thus making the 8610 Imager an important part of any mammography facility.

(back to top)

Dryview 8900 Image Laser

The Dryview 8900 Imager is a high volume printer capable of handling multi modality enviroments CT, DR, PACS, and with optional upgrades a high volume mammography printing with up to 3.6 D-max.

 

 

 

Dimensions (includes sorter)
Height: 60 inches,Width: 32 inches, Depth: 40 inches

Electrical Requirements
100–240 VAC; 50/60 Hz; maximum 15 amps

Warranty
Six months - partys only. See warranties for specifics

Advantages
Featuring true dry laser technology, along with an optional six-bin film sorter,
it is a very expandable friendly laser printer that can increase work flow and
productivity for you today as well as accommodate your future additional modality
needs. A high speed printer capable of printing 200 film per hour on five different
film sizes, up to three at a time each at 650 dpi, having over 16,000 possible gray
levels, the largest printable pixel matrix on the market at 9,100 x 11,037 and the only
dry imager with 100 megapixels on 14 x 17 films, the decision is easy.

Optional
8900 Keypad

(back to top)

MIMs

MIM 9410 and MIM 200

Dimensions
Length 17.2 inches. Width 8.1 inches. Height 17.5 inches.

Electrical Requirements
90-135 VAC, 60 Hz or 180-265 VAC, 50 Hz

Warranty
Six months - parts only. See warranties for specifics.

 

 

 

 

 

 

 

 

 

 

 

Quality Control Testing
All MIM systems are configured to your specifications and tested on
our in-house ethernet network.

The MIM 9410 and MIM 200 Image Acquisition Systems are flexible
and modular, having no monitor, keyboard, or mouse. Used as a
Modality Server which can capture images from up to three directly
connected Digital or Video modalities, converting the image data to
DICOM and sending the images to a network destination of choice
for printing, or used as a Print Server which receives DICOM images
from an Ethernet network that the Print Server continuously monitors

and automatically captures images addressed to it. After the images
are formatted they are then sent to a designated DICOM compliant
network printer. This is all accomplished without operator intervention.

Control is Easy
Operator uses host control devices or optional keypads to capture, format, and print images. The touch screen keypad gives the operator many options such as print, store, sequential store, erase, copies, stop print, format, etc. For images that are received faster than the printer can print, both MIM systems will store the images in memory until they can be printed, thus increasing work flow and productivity.

Optional
IMS keypad

(back to top)

Processors

M6B 90 Second Film Processor

Used for General Radiography and with upgrades, can also be used for Mammography. This versatile processor can be a standalone or docked to a mutliloader. It’s easy to use, maintain, and delivers high quality 90-second processing. The M6B has become our flagship film processor in recent years for good reason.

Control Is Easy
With the on board electronics that controls a variety of essential system controls, your engineer has many adjustment options that can simply be made by following the OEM adjustment procedures of the 100 Board in the electronics box.

 

 

 

 

 

 

Ease Of Use And Installation
The ease of use and install was well designed, a internal audible alarm to signify it’s
ok to feed another film. A digital display reflects the current developer temperature,
and with the push of a control panel mounted button you can check the replenishment
rates. A integrated standby control puts the processor in a idle state when films are not
being processed, but the processor still maintains chemistry temperature, and saves
unnecessary wear on moving parts, at the same time saves on energy and water
consumption. The dedicated developer, fixer, and wash drains help meet environmental
codes. A fixer diverter valve feature that makes it possible for fixer effluent to be directed
to silver recovery equipment. With a built in anti-siphoning device and the use of ambient
temperature wash water , there is no hot water plumbing or a thermostatic mixing valve necessary.

Quality Images
The electronically controlled temperature sensing system uses thermostats, heaters, heat exchangers, and potentiometers to control the developer, fixer, and dryer temperature. Optional flooded replenishment rate help maintain chemistry in low volume sites. A system that controls itself, and gives you options, getting consistent quality radiographs has never been easier, no matter what your particular needs may be.

Dimensions
Length 28in. Length with feed tray 38.5 in., Width 30 in. Height 48.5 in.

Electrical Requirements
Source 30 amp single phase - 208/220, 3-wire, earth ground required

Water Requirement
Temperature 40 to 85 F, Pressure 25-65 psi

Warranty
One year parts only. See warranties for specifics.

Quality Control Testing
To ensure customer satisfaction, it is Imtech Imaging’s policy that all our
refurbished equipment is tested for a minimum of 48hrs. At such time the
equipment is monitored to ensure all systems and components of the equipment
are functioning at OEM standards.

Exterior and Interior Main Frame
All our film processors are stripped to the frame. The frames are sand blasted, sanded, repaired, and refinished as well as all exterior panels in a greige industrial coating, and a new face plate is installed to match the original OEM appearance.

Transformer and Electrical Boxes
Both boxes are completely dismantled sand blasted, sanded, and repaired of any defects, then refinished in a satin black industrial coating. All relays, solid state relays, circuit breakers, and EMI filters are replaced with new or reused, and tested. A new power supply and film counter is used in the electrical box along with a new or reconditioned PCB100 Board. All reused components that have any signs of wear, corrosion, or the integrity of the component has been compromised in anyway is replaced with new for long reliable service.

Sensing Components
The developer heater assembly, thermistor assembly, and overtemp assembly are replaced with new or reconditioned and tested, a new thermowell that houses all these components is used on every processor, as well as a new LCD developer temperature display is replaced on every M6B. The dryer thermistor is replaced with new or reconditioned, the dryer overtemp thermistor and dryer temperature potentiometer is always replaced with new.

Chemistry Components
A new March recirculation pump, Gorman-Rupp replenishment pump, water inlet solenoid valve, and a developer cooling solenoid valve are installed on every M6B. The new or reused molded tank assembly is thoroughly inspected for any defects and fitted with new or reused heat exchanger tubes, new seals, nuts, and tank stiffeners. All diverter and drain valves located in the front and rear of the processor are replaced with new, as well as all the tubing and hose clamps.

Main Drive and Transport Assembly
The main drive bearing housings are reconditioned and reused, new bearings, drive gears, and drive shaft are installed on every M6B. The film transport system is made up of seven rack assemblies, an entrance detector, developer rack, dev/fix crossover (silicone), fixer rack, fix/wash crossover, wash rack (silicone), and a squeegee rack assembly, all rack assemblies are fitted with new roller assemblies, shafts, hardware, and side plates. The only parts on the racks that may be new or reconditioned are the tie rods and guide shoes. The dryer assembly is assembled with all new dryer rollers, shafts, drive pulleys, bearings, and a drive belt. A reconditioned and tested dryer heater is used and a reconditioned blower assembly is refinished in a satin black industrial coating, the assembly is fitted with new bearings and main shaft.

(back to top)

M35A / AM 120 Second Film Processor

Designed for medium and low volume processing, this table top or stand mounted processor is a great fit for imaging departments, surgical, and mammography suites. It has high quality results at a low volume processor cost.

 

 

 

 

 

Control is Easy
The on-board electronics control a variety of essential system controls,
this allows you options such as developer and dryer temperature control,
which can be adjusted with the integrated potentionmeters. Flooded replenishment
rates are easily checked with the quick disconnect tubing to eliminate removing
the rack assemblies and avoid possible chemistry spills.

Ease of Use and Installation
The ease of use and installation are well designed, an internal audible alarm to
signify it’s ok to process another film. A digital display (on AM models only)
reflects the current developer temperature, and with the push of a control panel
mounted button you can check the replenishment rates. An integrated standby
control puts the processor in an idle state when films are not being processed, but still maintains chemistry temperature,
and saves unnecessary wear on moving parts, at the same time saves on energy and water comsumption.

Both the M35A and M35AM have service friendly access and can be installed for through the wall operation and with the use of ambient temperature wash water hot water plumbing isn’t necessary, making for an easy installation.

Quality Imaging
The electronically controlled temperature sensing system uses thermostats, heaters, heat exchangers, and potentiometers to
control the developer, fixer, and dryer temperature. Optional flooded replenishment rate help maintain chemisttry in low volume sites.

A system that monitors itself, and gives you options is just a few reasons why the M35 has earned a worldwide reputation for reliability and produces quality radiographies.

Dimensions
Length 31in. Length with feed tray and receive bin 50 7/8 in.
Width 26 in. Height 20in. Height with stand 40 in.

Electrical Requirements
Source 20 amp 220V or 115V 50/60 HZ

Water Requirements
Temperature 40 to 85 F Pressure 25-65

Warranty
One year - parts only. See warranties for specifics.

Quality Control Testing
To ensure customer satisfaction, it is Imtech Imaging’s policy that all our refurbished equipment is tested for a minimum of 48hrs. At such time the equipment is monitored to ensure all systems and components of the equipment are functioning at OEM standards.

Exterior and Interior Main Frame
All our film processors are stripped to the frame. The frames are sand blasted , sanded, repaired, and refinished as well as all exterior panels in a greige industrial coating, and a new face plate is installed to match the original OEM appearance.

Electrical Box
The electrical box is completely dismantled sand blasted, sanded , and repaired of any defects, then refinished in a satin black industrial coating. All relays, solid state relays, EMI filter (220 Processors Only),and circuit breakers are replaced with new or reused, and tested. A new or reconditioned PCB100 Board is installed. All reused components that have any signs of wear, corrosion, or the integrity of the component has been compromised in anyway is replaced with new for long reliable service.

Sensing Components
The developer heater assembly, thermister assembly, and overtemp assembly are replaced with new or reconditioned and tested, a new thermowell that houses all these components is used on every processor. A new dryer PCB 800 Board, dryer overtemp thermister, and dryer temperature potentiometer is replaced on every processor to ensure correct dryer temperature.

Chemistry Components
A new March recirculation pump, Gorman- Rupp replenishment pump, water inlet assembly is installed on every M35 processor. The three chemistry tank assemblies are replaced with new and fitted with new or reused heat exchanger tubes, new seals, nuts, fittings, and tank stiffeners are installed, as well as all the tubing , tubing fittings, and hose clamps are replaced with new.

Main Drive and Transport Assembly
A new or reconditioned and tested main drive motor is installed. The main drive bearing housings are replaced with new or reconditioned and reused, new bearings, worm drive gears, and drive shaft are installed on every M35. The film transport system is made up of seven rack assemblies, an entrance detector, developer rack (standard), or developer rack (mammo), dev/fix crossover (silicone), fixer rack, fix/wash crossover, wash rack (silicone), dryer assembly. All rack assemblies are fitted with new roller assemblies, shafts , hardware, and side plates. The only parts on the racks that may be new or reconditioned are the tie rods and guide shoes. A new or reconditioned and tested dryer heater is used and a reconditioned blower assembly is refinished in a satin black industrial coating.

(back to top)

 

MIN-R Mammography Film Processor

Designed for mammography and a shared processing environment, this stand alone table top or stand mounted processor can also be docked to a miniloader 2000P for room light film handling. This combination is ideal for mammo suites, resulting in hight quality processing in an affordable, compact package.

 

 

 

Control is Easy
The on-board electronics control a variety of essential system controls, this
allows you options such as developer and dryer temperature control, which
can be adjusted with the integrated potentionmeters. Replenishment rates are
easily checked with the quick disconnect tubing to eliminate removing the rack
assemblies and avoid possible chemistry spills.

Ease of Use and Installation
The ease of use and installation are well designed, an internal audible alarm to
signify it’s ok to process another film. A digital display reflects the current
developer temperature for simplifying regulatory record keeping, and with the
push of a control panel mounted button you can check the replenishment rates.
An integrated standby control turns off the film drive, dryer blower, and dryer
heater when films are not being processed, but still maintains chemistry
temperature,and saves unnecessary wear on moving parts, at the same time
saves on energy and water comsumption.

The MIN-R has service friendly access and can be installed for through the wall operation and with the use of ambient temperature wash water hot water plumbing isn’t necessary, making for an easy installation.

Quality Imaging
The electronically controlled temperature sensing system uses
thermostats, heaters, heat exchangers, and potentiometers to
control the developer, fixer, and dryer temperature. Optional flooded replenishment rate help maintain chemisttry in low volume sites.

A system that monitors itself, and gives you options is just a few reasons why the MIN-R has earned a worldwide reputation for reliability and produces quality mammographs.

Dimensions
Length 29.7 in. Length with feed tray and receive bin 51 in.
Width 26.5 in. Height 20.5 in. Height with stand 40 in.

Electrical Requirements
220V 50/60 HZ

Water Requirements
Temperature 40 to 85 F
Pressure 25-65

Cycle Time
Standard Cycle: 164 films/hour
Rapid Cycle: 209 films/hour

Warranty
One year - parts only. See warranties
for specifics

Quality Control Testing
To ensure customer satisfaction, it is Imtech Imaging’s policy that all our refurbished equipment is tested for a minimum of 48hrs. At such time the equipment is monitored to ensure all systems and components of the equipment are functioning at OEM standards.

Exterior and Interior Main Frame
All our film processors are stripped to the frame. The frames are sand blasted , sanded, repaired, and refinished as well as all exterior panels in a greige industrial coating, and a new face plate is installed to match the original OEM appearance.

Electrical Box
The electrical box is completely dismantled sand blasted, sanded , and repaired of any defects, then refinished in a satin black industrial coating. All relays, solid state relays, EMI filter (220 Processors Only),and circuit breakers are replaced with new or reused, and tested. A new or reconditioned PCB100 Board is installed. All reused components that have any signs of wear, corrosion, or the integrity of the component has been compromised in anyway is replaced with new for long reliable service.

Sensing Components
The developer heater assembly, thermister assembly, and overtemp assembly are replaced with new or reconditioned and tested, a new thermowell that houses all these components is used on every processor. A new dryer PCB 800 Board, dryer overtemp thermister, and dryer temperature potentiometer is replaced on every processor to ensure correct dryer temperature.

Chemistry Components
A new March recirculation pump, Gorman- Rupp replenishment pump, water inlet assembly is installed on every MIN-R processor. The three chemistry tank assemblies are replaced with new and fitted with new or reused heat exchanger tubes, new seals, nuts, fittings, and tank stiffeners are installed, as well as all the tubing , tubing fittings, and hose clamps are replaced with new.

Main Drive and Transport Assembly
A new or reconditioned and tested main drive motor is installed. The main drive bearing housings are replaced with new or reconditioned and reused, new bearings, worm drive gears, and drive shaft are installed on every MIN-R. The film transport system is made up of seven rack assemblies, an entrance detector, developer rack (mammo), dev/fix crossover (silicone), fixer rack, fix/wash crossover, wash rack (silicone), dryer assembly. All rack assemblies are fitted with new roller assemblies, shafts , hardware, and side plates. The only parts on the racks that may be new or reconditioned are the tie rods and guide shoes. A new or reconditioned and tested dryer heater is used and a reconditioned blower assembly is refinished in a satin black industrial coating and reused.

(back to top)

 

Refurbished Rapid Access Processors

(3000 RA shown) Call for availability and quote 270RA, 460RA, 480RA, 2000, 2000A, 3000RA, 5000RA

These processors have four integrated transport speeds for radiology departments where multi-speed processing is necessary.

The refurbishing process of our Rapid Access Processors is the same thorough approach as that of our flagship processors, same warranty, and the same committment to you and your customers.

 

 

 

 

 

 

 

Cat. No. 270
Cat. No. 460
Cat. No. 480
Cat. No. 2000/A (not multi-speed)
Cat. No. 3000
Cat. No. 5000

(back to top)

 

Multiloaders

Refurbished Multiloader - 7000 Film Processor

Call for availability and quote.

 

 

 

 

 

 

 

 

The multiloader 7000 is a room light film handler designed for high volume radiology departments, accommodating 13 different film sizes 7 at time. Capable of unloading and loading a cassette, transporting the exposed film to the integrated 3000RA processor delivering you a dry ready to read 35 x 43 cm radiograph in just 80 seconds, without the need of a darkroom.

The refurbishing of our multiloader 7000’s follow the same thorough description of that of the ML300 and ML700 Plus, same warranty and same commitment to quality.

Dimensions
Width 32.5 in. Depth. 33.5 in. Height 55 in.

Electrical Requirements
120/208V 60 Hz triple phase, 30 Amp
120/220V 60 Hz single phase, 30 Amp
120/240V 60 Hz single phase, 30 Amp

Water Requirements
Temperature 40 to 84 F
Flow Rate .5gal. Per minute (+/-10%)
Drain 4 gal. Per minute

(back to top)

Refurbished Miniloader - 2000P Film Processor

Call for availability and quote.

 

 

 

 

 

 

The miniloader 2000P is a roomlight film handler that automatically unloads exposed films, processes them in the integrated MIN-R processor and reloads your MIN-R2 cassettes in just 12 to 15 seconds depending on film size.

The refurbishing of our miniloaders follow the same thorough description of that of the ML 300 and ML700, same warranty and same committment quality.

Electrical Requirements
110V/240V Single phase

Water Requirements
Temperature 40 to 85 F
Pressure 25-65

Cassettes
Min-R2 cassettes (18 x 24) and (24 x 30)

(back to top)